Argo Ulisse 13DCI mobile split air conditioner / R32 - with WIFI

Advantages over monoblock air conditioners:

• Quiet operation: The split design ensures a significant reduction in noise levels inside.
• Greater energy efficiency: The Ulisse 13DCI uses state-of-the-art inverter technology that adjusts compressor performance to actual cooling needs. This ensures more efficient operation and saves energy.

Convenient operation:

• The device is conveniently controlled using the included remote control.
• The target temperature can be set in 1°C increments between 10°C and 32°C.
• The "I Feel" function enables precise temperature control at the user's location. The remote control measures the temperature and controls the air conditioner accordingly.

How it works:

• The warm room air is sucked in at the indoor unit, cooled and blown back into the room.
• During the cooling process, moisture is extracted from the air, which is then passed through the connecting pipe to the outdoor unit and atomized there.

Important instructions:

• The copper cooling pipe is sensitive and must not be kinked.
• The separation of the pipe for the wall penetration should be carried out by a specialist to avoid coolant loss.
• We offer trained specialists who can carry out delivery and installation for you.

Scope of delivery:

• Mobile air conditioner with Wi-Fi function
• Indoor and outdoor unit with 2m cooling line (connected ready for operation)
• remote control
• Cable (approx. 2.30 m) with Swiss plug
• Operating instructions (German, Italian, French, English and other languages)

Latest series:

• The device uses the environmentally friendly refrigerant R32.
• Optional extension lines are available for R32 or R410A.

Optional accessories:

• Extension cables (2m or 4m, up to a maximum of 6m)
• Wall bracket for the outdoor unit

Technical data:

• Energy efficiency class: A
• Operating modes: Cooling, Ventilation
• For rooms up to: 40 m² (depending on heat sources)
• Cooling capacity: 3920 W / 13340 BTU/h
• Connection voltage: 230 V / 50 Hz
• Temperature setting range: 10° - 32° C
• Power consumption: 1600 W
• Dehumidification capacity: approx. 1.9 l/h
• Refrigerant: R32
• Operating noise: 37 - 40 dB(A) (measured), 34 - 37 dB(A) (manufacturer's specification)
• Air circulation: 335-375-400 m³/h
• Operation: Remote control
• Cable length: 2 m (ø40 mm)
• Dimensions of the indoor unit: 79 x 58 x 25 cm
• Dimensions of the outdoor unit: 49 x 53 x 25 cm
• Weight indoor/outdoor unit: 42 / 15 kg
• Warranty: 2 years
• SEER: 5.2

Wi-Fi connection:

• Connect the device to power.
• Press and hold the power button for 5 seconds until the Wi-Fi light flashes.
• Connect device to Wi-Fi network "UI_Setup".
• Open 192.168.4.1 in the browser.
• Enter Wi-Fi network and password, click "APP Connect".
• Change username and password (optional), click "APP Connect" again.
• Device can be controlled via WLAN.